Floating Pump

Portable floating pump, ≥800 L/min, ≥30m head, draws water directly from the surface — for drainage and remote water supply.

The floating fire pump is a portable firefighting/drainage pump with a built-in float, capable of drawing water directly while floating on the water surface. It is especially suitable for rivers, lakes, reservoirs, and waterlogging sites where no power supply or fixed pump station is available. Maximum flow rate ≥800 L/min (approx. 48 m³/h), maximum head ≥30 m, with discharge outlets of 65/80 mm. It is powered by a two-stroke or four-stroke gasoline engine, featuring recoil (pull-start) or electric start. The pump can draw water from nearby sources for long-distance water supply or waterlogging drainage.

Longsheng'an Fire is equipped with floating fire pumps and compatible hose couplings, providing product selection, training, and bid support, and undertakes centralized procurement for government and enterprise clients.

Selection / Quote:📧 Email Us Free Consultation

Technical Specifications (Selection Reference)

Values are based on the project technical parameter table; final configuration subject to scheme design.

Performance

Type	Portable Floating Fire Pump (Surface Floating Type)
Max Flow	≥800 L/min (approx. 48 m³/h)
Max Head	≥30m
Intake	Surface direct water intake (with built-in float)

Power & Ports

Engine	Two-stroke/four-stroke gasoline engine
Outlet	65mm / 80mm
Start	Hand-pull Recoil / Electric Start

Certification: Test Report, Factory Certificate of Conformity · Customization (extra hose, accessories, etc.) available on request

Product Details

A floating pump is a portable firefighting/drainage pump with a built-in float that can draw water directly while floating on the surface. It is especially suitable for rivers, lakes, and reservoirs as well as urban flooding sites where there is no power supply or fixed pump position. Maximum flow rate ≥800L/min (approximately 48m³/h), maximum head ≥30m, outlet diameter 65/80mm, equipped with a two-stroke or four-stroke gasoline engine, manual recoil or electric start, capable of drawing water nearby for long-distance water supply or drainage pumping.

The built-in float enables it to draw water stably as the water level rises and falls, making it one of the most flexible water intake devices for flood control and emergency rescue operations.

Applications

Applicable scenarios: Water intake from nearby rivers, lakes, and reservoirs, long-distance water supply, pumping at waterlogging points, and complementing drainage pumping stations.

Non-applicable scenarios: Water areas with large particulate debris without filtration (a filter screen is required); specific conditions shall be subject to the actual site.

Delivery & Commissioning

Equipment products do not require installation: upon delivery, perform acceptance inspection (test run to verify flow and head) → organize operation training → register into inventory. It is recommended to periodically start up and inspect the oil and electrical circuits, and clean the filter screen and pump body before and after use.

After-sales Policy

① The overall warranty is subject to the contract; ② Supply of wearing parts such as spark plugs and oil seals is provided; ③ Repair requests are responded to within 48 hours; ④ Startup and maintenance training is provided.

Floating Pump

Technical Specifications (Selection Reference)

Performance

Power & Ports

Product Details

Applications

Delivery & Commissioning

After-sales Policy

Other Products

Swiftwater Rescue Life Jacket

Assault Boat / FRP RIB + Outboard

Pneumatic Line Thrower

Wetsuit Rescue Kit