Import Guides & Technical Notes

How to Compare Fire Extinguisher Quotations from China

In short

Compare Chinese fire extinguisher quotations by checking filling weight, test reports, cylinder standard, powder grade, valve type and certifications, not price alone.

Compare fire extinguisher quotations from China by turning every line item into a verifiable specification: exact powder filling weight, fire rating test report and issuing lab, cylinder standard and hydrostatic certificate, steel grade and wall thickness, powder content and standard, valve and safety device, gauge calibration, MOQ, lead time and container loading. A quotation that cannot answer these points is not comparable, whatever the FOB price says.

What should a Kenyan buyer compare first: price or specification?

Specification first. A 5kg ABC dry powder extinguisher can be built to very different levels, and the price difference between two quotations usually sits in the powder weight, the cylinder steel and the valve. Ask each supplier to quote against the same specification sheet, then compare. If one quote is 15-20% cheaper, find out which of the items below changed before you treat it as a saving.

For a reference unit, look at a 5kg ABC Dry Powder Fire Extinguisher and use its data sheet as your baseline specification.

Does the 5kg rating mean powder weight or gross weight?

It must mean the nominal charge of ABC dry powder, not the gross weight of the filled unit. A 5kg extinguisher typically carries 5kg of powder; gross weight is roughly 8-9kg depending on cylinder and valve. Ask for the filling weight in kilograms and the tolerance (commonly ±2%). A supplier who quotes “5kg gross” is selling a smaller extinguisher. Weigh one sample on arrival and record it against the packing list.

Which documents prove the fire rating and cylinder safety?

Ask for two separate documents: a fire rating test report showing the model achieves the claimed class A and B ratings (for example 21A 113B or 34A 144B), issued by a named accredited laboratory, and a hydrostatic test certificate for the cylinder body. The cylinder standard should be stated clearly: EN 3-7, ISO 7165 or GB 4351. These are different standards with different test regimes, so the certificate must match the standard printed on the label. Never accept a certificate number without the report itself; verify the lab exists and the model matches.

What cylinder specification should the quotation state?

The quotation should state steel grade for body and base ring, minimum wall thickness, working pressure, test pressure and the valve and safety relief device fitted as standard. Typical ABC stored-pressure units work at 14-15 bar and are tested at roughly 25 bar, but confirm the figures for your model. A pressure gauge should be fitted, calibrated and marked in bar and psi with a visible green operating zone. Powder should be stated as monoammonium phosphate content (commonly around 75-90% MAP for ABC dry chemical) and referenced to EN 615 or ANSI/UL 299.

Quotation itemWhat to requireWhy it matters
Powder charge5kg nominal, ±2%, MAP % statedDetermines real extinguishing capacity
Fire ratingReport showing 21A 113B or 34A 144BProves performance, not label claims
CylinderEN 3-7 / ISO 7165 / GB 4351, wall thickness, steel gradePressure safety and service life
Valve and gaugeType stated, gauge in bar and psi, green zoneReliable discharge and inspection
CertificationCE/EN 3, MED or third-party reportCustoms and market entry in Kenya
PackingCarton size, units per carton, container gross weightFreight cost and KEBS clearance

Can the supplier private-label the units and cartons?

Yes, most Chinese factories can, but confirm MOQ, artwork approval steps and who owns the printing plates. Ask for your brand, warning labels and a multilingual user manual printed on the unit and carton. Request a pre-production sample photo before mass production. For Kenyan importers, confirm English and Swahili manual options early, because label changes after production are expensive.

What lead time and loading data should the quote include?

For 1 x 20ft container, ask for lead time after deposit and artwork approval (commonly 25-35 days), carton dimensions, units per carton and total gross weight. Fire extinguishers are heavy; a 20ft container may cube out before it weights out, so the supplier should give both figures. Confirm whether pallets are used, as this changes loading quantity and unloading cost at Mombasa.

Which certifications support Kenyan customs and market entry?

Ask which documents the factory can actually provide: CE or EN 3 test reports, MED where relevant, and a third-party pre-shipment inspection report. For Kenya, check current KEBS requirements and the PVoC route with your clearing agent before ordering, and confirm the factory can support inspection by SGS or Bureau Veritas. Do not accept a certificate the factory cannot show in full.

Common mistakes when comparing quotations

  • Comparing FOB price without comparing powder weight and cylinder specification.
  • Accepting a certificate number with no report, or a report for a different model.
  • Ignoring the valve, gauge and safety relief device, which drive service life.
  • Forgetting carton size and gross weight, then paying unexpected freight.
  • Ordering private label without approving artwork and manual language first.
  • Skipping pre-shipment inspection to save a small fee.

Practical checklist before you place the order

  • Specification sheet signed by both sides, including filling weight and tolerance.
  • Fire rating report and hydrostatic certificate received and checked.
  • Cylinder standard, steel grade and wall thickness confirmed in writing.
  • Powder MAP percentage and EN 615 or UL 299 reference stated.
  • Valve type, gauge calibration and green zone confirmed.
  • MOQ, artwork, manual languages and sample approval agreed.
  • Lead time, carton data and container gross weight confirmed.
  • Certification and inspection plan agreed with your clearing agent.

When your specification sheet is ready, request an FOB quotation against it so every supplier quotes the same unit.

FAQ

What is the exact filling weight of the ABC dry powder, and does the 5kg rating refer to the powder weight or the total gross weight?

The 5kg rating refers to the nominal ABC dry powder charge, not the gross weight of the filled extinguisher. A 5kg unit typically holds 5kg of powder and weighs roughly 8-9kg gross, depending on cylinder and valve. Ask the supplier to state filling weight in kilograms with a tolerance, commonly ±2%, and to confirm it in the specification sheet. If a quotation describes 5kg as gross weight, the extinguisher is smaller than you expect, so request clarification before comparing prices.

Can you send the fire rating test report showing the 5kg unit achieves at least 21A 113B or 34A 144B, and which accredited lab issued it?

Yes, a serious factory should send the full fire rating test report, not just a certificate number, and name the accredited laboratory that issued it. Check that the report covers the exact model and size you are buying, and that the class A and B ratings meet your tender requirement, such as 21A 113B or 34A 144B. Verify the laboratory exists and the report is current. If the supplier cannot produce the report, treat the rating as unproven.

Which standard does the cylinder meet - EN 3-7, ISO 7165, or GB 4351 - and can you provide the hydrostatic test certificate for the cylinder body?

The cylinder standard must be stated in writing, and EN 3-7, ISO 7165 and GB 4351 are different standards with different test regimes. Ask for the hydrostatic test certificate for the cylinder body and confirm the standard on the certificate matches the label and your tender. Request the report itself, not only a number, and check the model and production batch. If the factory cannot show the certificate, the cylinder safety claim is unverified.

What percentage of monoammonium phosphate is in the powder, and does the powder meet EN 615 or ANSI/UL 299 requirements?

The quotation should state the monoammonium phosphate percentage, commonly around 75-90% MAP for ABC dry chemical, and reference EN 615 or ANSI/UL 299. Ask for the powder supplier's certificate of analysis and confirm the grade matches the fire rating report. Powder quality affects extinguishing performance and shelf life, so a vague answer such as "ABC powder" is not enough. Compare MAP content between quotations before you compare price.

What is your MOQ for a private-label order, and can you print our brand, warning labels and multilingual user manual on the units and cartons?

Private-label MOQ varies by factory and usually depends on carton and label printing runs, so ask for the figure in writing along with artwork approval steps. Confirm that your brand, warning labels and multilingual manual, including English and Swahili if needed, can be printed on units and cartons. Request a pre-production sample photo before mass production. Label changes after production are costly, so settle artwork and manual languages before you pay the deposit.

Cheng Zhihong · Sales Manager

Cheng Zhihong, Sales Manager, handles export quotations, samples and shipping documents.

Contact Us