Import Guides & Technical Notes

5kg vs 6kg Extinguisher: Does One Kilo Matter for Importers

In short

For most Vietnamese distributors, a 6kg ABC extinguisher gives longer discharge time and better 34A/183B coverage, while 5kg is lighter and cheaper per unit.

A 6kg ABC dry powder extinguisher is usually the better default for a Vietnamese wholesale distributor, because it typically carries a higher fire rating and longer discharge time than a 5kg unit, while the price difference per unit is small. The 5kg model still makes sense for price-sensitive retail channels, small shops and motorbike-mounted service work where weight matters. The practical decision is not which kilo is “better” in general, but which one matches your customers, your logistics and the certification your buyers accept. This article compares the two sizes on filling weight, ratings, cylinder specifications, valve compatibility and landed cost so you can decide with numbers rather than habit.

What is the real difference between a 5kg and a 6kg ABC extinguisher?

The difference is roughly one kilogram of monoammonium phosphate powder plus a slightly larger cylinder. In practice that extra kilo buys more discharge time and, on many certified designs, a higher fire rating. It also changes the gross shipping weight, carton dimensions and the number of units per pallet — all of which affect your landed cost in Vietnam.

Two cautions. First, nominal sizes differ between markets: a “6kg” unit sold in Europe under EN 3 and a “6kg” unit built to GB 4351 for the Chinese market may not share the same filling tolerance or rating. Second, the rating is a property of the complete tested unit, not of the powder weight alone. Always compare the rating stated on the test report for the exact model you are buying.

Which fire rating do you actually get: 5kg or 6kg?

As a general pattern, 6kg ABC units reach 34A/183B or similar, while 5kg units often sit at 27A/144B or 21A/113B depending on the design. These are typical figures, not a promise for every factory: the rating must come from a test report issued for that model by an accredited laboratory. Ask for the report and check that the model reference on the certificate matches the model on your purchase order.

For Vietnam, check which rating your buyer's tender or insurance requirement specifies. Many commercial buildings and industrial clients specify a minimum A rating per floor area, and a 6kg unit can reduce the number of units needed — which often offsets the higher unit price.

How do the two sizes compare on specifications and shipping?

Parameter5kg ABC unit (typical)6kg ABC unit (typical)
Nominal powder charge5 kg6 kg
Typical fire rating21A–27A / 113B–144B27A–34A / 144B–183B
Typical discharge time13–15 s15–18 s
Typical gross weight8.5–9.5 kg10–11 kg
Working pressure12–15 bar12–15 bar
Test pressureAbout 25–27 barAbout 25–27 bar
Units per 20ft container (approx.)HigherLower by roughly 10–15%

Values vary by manufacturer and standard; confirm them on the datasheet for the exact model. The container figure matters in Vietnam because freight is charged per container, so a 10–15% drop in units per container raises the freight cost per unit. Run the full landed-cost calculation before assuming the 5kg is cheaper.

Which standard should the cylinder and valve meet for Vietnam?

Vietnam accepts both EN 3 and GB 4351-based products depending on the buyer. EN 3-7 covers cylinder design, and EN 3-8 covers construction and performance; a CE-marked unit should be supported by a notified-body certificate and test report. GB 4351 units are built for the Chinese market and may not carry CE marking. If your customer needs CE, specify it in writing and require the certificate with the exact model reference before production.

For valve and head assemblies, ask whether the thread and coupling match the refill and service equipment used in Vietnam. A unit that cannot be recharged locally with standard tools becomes a service problem for your customer.

What affects powder quality and shelf life?

ABC powder is mainly monoammonium phosphate with additives to improve flow and resist caking. Buyers should ask for the monoammonium phosphate percentage and for a caking or moisture-absorption test report, plus confirmation of compliance with EN 615 or UL 299 if those standards are required. Recommended service intervals are typically annual inspection with recharge or replacement per the manufacturer's instructions and local rules. Store cartons dry and off the floor; humidity in Vietnamese warehouses is the most common cause of premature caking complaints.

What are the common mistakes importers make with 5kg and 6kg units?

  • Comparing unit price only, ignoring freight per container and the number of units per pallet.
  • Accepting a certificate that names a different model or a different powder weight.
  • Assuming a 6kg unit always carries a higher rating without checking the test report.
  • Ordering CE-marked units for one customer and GB 4351 units for another without separate model codes and labels.
  • Forgetting to confirm valve thread compatibility with local refill equipment.
  • Mixing 5kg and 6kg cartons in one container without updating the packing list and label artwork.

What should you check before placing a 5kg or 6kg order?

  • Exact model reference and nominal powder weight on the datasheet.
  • Test report showing the fire rating for that model.
  • Cylinder standard (EN 3-7 or GB 4351) and CE marking status, with certificate.
  • Working pressure, test pressure and stated burst pressure margin.
  • Powder composition, monoammonium phosphate percentage and caking test report.
  • Valve type and compatibility with Vietnamese refill equipment.
  • MOQ, FOB or CIF price at 500, 1,000 and 5,000 units.
  • Lead time for 1,000 units, production schedule and pre-shipment inspection report.
  • Carton dimensions, units per pallet and units per 20ft container.

If you also stock small units for shops and vehicles, compare the same data for a 1kg ABC Dry Powder Fire Extinguisher. When you are ready to compare 5kg and 6kg pricing side by side, request an FOB quotation with your target volumes and destination port.

Does one kilo change your landed cost in Vietnam?

Yes, but usually by less than the price gap suggests. The extra kilo raises gross weight and reduces units per container, so freight per unit rises slightly. Against that, a higher rating can reduce the number of units a project needs. Calculate cost per protected area or per rating point, not cost per kilogram, and the 6kg often wins for commercial and industrial channels while the 5kg remains competitive for retail and small-shop distribution.

FAQ

What is the exact filling weight of ABC dry powder in a 5kg or 6kg extinguisher?

The nominal charge is 5 kg or 6 kg of ABC dry powder, but the permitted tolerance depends on the standard the unit is built to. EN 3 and GB 4351 allow small tolerances around the nominal figure, so ask for the filling specification for the exact model. Confirm the nominal weight on the datasheet and on the label, and check that the test report was issued for that same filling weight before you approve production.

Can you send the test report showing the fire rating for the 5kg and 6kg models?

Yes, a test report should be provided for each model you order, and you should check that the model reference and powder weight match your purchase order. The rating is valid only for the tested configuration. If a supplier cannot produce a report naming the exact model, treat the rating as unverified. Request the report before you pay a deposit, and keep a copy with your import documents for Vietnamese customs and customer audits.

Which standard is the cylinder made to, EN 3-7 or GB 4351, and is it CE marked?

The cylinder is built either to EN 3-7 for CE-marked units or to GB 4351 for the Chinese market, and the two are not interchangeable for buyers who require CE. Confirm in writing which standard applies to your order and request the certificate with the exact model reference. A GB 4351 unit may not carry CE marking, so do not assume CE compliance from a general catalogue statement.

What are the working and test pressures, and what is the burst safety margin?

Typical ABC units of this size work at 12–15 bar and are tested at roughly 25–27 bar, with a burst pressure well above the test pressure. The exact figures must come from the cylinder specification and the test report for your model. Ask for the stated burst pressure and the margin over working pressure in writing, and check that the cylinder marking matches the certificate before shipment.

What is the ABC powder composition and does it meet EN 615 or UL 299?

ABC powder is mainly monoammonium phosphate with additives for flow and anti-caking, and compliance with EN 615 or UL 299 must be confirmed by a report for the specific powder used. Ask for the monoammonium phosphate percentage and the standard the powder is tested to. If your customer requires EN 615 or UL 299, put that requirement in the purchase order and require the report before production starts.

What is the shelf life and service interval, and is there a caking test report?

Service intervals are typically annual inspection with recharge or replacement according to the manufacturer's instructions and local rules, and shelf life depends heavily on storage humidity. Ask for a caking or moisture-absorption test report for the powder. In Vietnamese warehouses, store cartons dry and off the floor. A powder that passes a caking test in the factory can still fail after a humid rainy season if storage is poor.

What is the MOQ and the FOB or CIF price at 500, 1,000 and 5,000 units?

MOQ depends on the model and labelling, so request a written quotation at 500, 1,000 and 5,000 units for both the 5kg and 6kg models. Ask for FOB and CIF to your Vietnamese port so you can compare landed cost including freight per container. Confirm whether the price includes cartons, labels, manuals and any certification copies you need for customs and customer audits.

What is the lead time for 1,000 units and can you provide an inspection report?

Lead time for 1,000 units is typically several weeks after deposit and artwork approval, but confirm it in writing with a production schedule. Ask for a pre-shipment inspection report covering weight, pressure, labelling and packing, and specify the inspection scope in the contract. Also confirm carton dimensions and units per pallet so your warehouse and container planning are accurate.

Cheng Zhihong · Sales Manager

Cheng Zhihong, Sales Manager, handles export quotations, samples and shipping documents.

Contact Us